Tablet USB Host & Charging AdapterThe STS-2UE adapter provides wired Ethernet connectivity and simultaneous charging capability (SimulCharge) for select Samsung tablets. This adapter includes two USB-2.0 (A-Type) ports for connecting two additional peripherals. LAVA’s SimulCharge technology allows the tablet to operate as a USB Host while continuously charging the battery.

Standard USB OTG Adapters do not allow the tablet to be charged while operating with USB accessories. This intelligent adapter is designed for robust operation allowing rapid switching between SimulCharge and Charge-Only mode.

The LAVA product can be switched into Charge-Only mode to rapidly replenish the battery in the same manner as USB Charger with a Direct Charge Port (DCP) as defined by the USB Battery Charging specification v1.2.

The STS-2UE can be used on its own, or as part of a third-party enclosure solution, supporting a variety of kiosk-type

Applications

This adapter allows continuous use of Android-supported USB peripherals such as:
• flash drives
• magstripe readers
• 2D scanner
• printers
• camera
• keyboard/mouse
• biometric readers
• Ethernet adapter (needs tablet firmware support)
• USB-hubs
• oher USB host mode devices

Features

• Designed for select Samsung Tablets
• USB Host operation while charging
• 10/100 Ethernet
• 2 USB 2.0 ports
• USB-A receptacles can connect to USB Hubs
• Works with tablet’s original charger
• Up to 100m (328 ft) from power source
• Can operate with any 5 volt supply
• Works with external USB battery packs
• 3.3 foot (1 meter) tablet connection cable
• Convenient charge mode switch
• Charge mode status indicator lights
• Network and USB activity lights
• Enhanced charging stability
• No tablet rooting required

Optional features for OEM applications
• Ability to use external Charge Mode switch and Charge Mode indicator LEDs

Specifications

Cables:
1 x Micro USB B to Micro USB B cable (3.3ft/1m)
Note: The custom 3.3ft/1m cable connects the device to the tablet. This cable may not be be extended.
Ports/Connectors:
1 x RJ45 10/100 Ethernet port
2 x USB A port (for USB 2.0 accessories)
1 x Micro USB B port (Tablet connection)
1 x Micro USB B port (Power input)
1 x Push Button (Charge mode switch)
1 x Charge Only indicator LED
1 x Charge-Only indicator LED
1 x SimulCharge indicator LED
1 x Ethernet Link indicator LED
1 x Tablet USB indicator LED
OEM Connectors:
1 x 2-pin header (to optional Charge Mode switch)
1 x 2-pin header (Type jumper)
1 x 3-pin header (Charge Only indicator LED)
1 x 3-pin header (SimulCharge indicator LED)
Note: The OEM Connectors are not available on the standard product.
Dimensions:
Depth: 3.3 inches (83 mm)
Width: 3.8 inches (97 mm)
Height: 1.7 inches (44 mm) – with standoffs
Weight: 7.0 oz (shipping)
Weight: 4.2 oz (device only)